HotActions 3.0 User's guide - Revision history

Natalia: /* Work with project */

2016-03-14T06:18:55Z

Work with project

← Older revision		Revision as of 06:18, 14 March 2016
Line 72:		Line 72:
	==Work with project==		==Work with project==

	~~After making~~ all ~~the~~ necessary ~~settings of the~~ input and output video, you ~~can begin~~ to further ~~familiarize yourself with~~ the ~~studio. This section discusses~~ the ~~general scheme of work with project files virtual studio~~. Open the ~~application~~ HotActions 3.0.		When all necessary input and output video settings will be made, you are ready to further awareness of the possibilities of the Studio.
	~~Appendix HotActions~~
	On the File menu of the main window, select the command Open ... to open the standard Open dialog to specify in the drop-down list, type the project file (* .vs), and then in the drop-down list and select the folder to find one of the sample projects. Most often, the directory for the sample projects used D: \ Focus \ Examples.		Open the HotActions 3.0 application .
	~~After first opening the project name will appear in the context menu of the project team and the project can be opened from this menu.~~
	~~For documentations select the project News,~~
	~~D: \ Focus \ Documents \ HA3 Project \ News.vs~~
	~~When loading a project~~ application opens multiple panels located by default. All components are described in more detail in the following sections of this document: the projects can be found in the section "Project" on the project window - see "Project Window" on the window of the project file - see "project file - the window with the files loaded project"; Document windows are described in the section "Dialogs applications", push the control panel - see "Keypads applications."

	~~Example of working with the studio - loaded project News~~		HotActions application
	Directly above the window of the project is hotset (from the English. «Hotset»), which hosts keypads scene management - hotbar (from the English. «Hotbar»). They can be seen in the document window Novosti.vs project.
	To test the functionality of the studio, you can click Start All located on the toolbar. It is intended to start a project. If the previous steps are done correctly, then some time in the Preview Render a still image of the actor in the scene will change the video with the video source connected to the input video signal and the board selected as the input device for video LIVE_1 Settings Dialog input video signals. The application ~~then goes embedding testing.~~
	~~When you press the Mode button Ether located on the toolbar of the main application window, a transition occurs in this mode.~~

	News ~~Draft~~ mode ~~ether~~		From the '''File''' menu of the main window, select the '''Open ...''' command and in the standart dialog ''Open'' that opens specify in the drop-down menu ''Files of Type'' '''Projects''' ('''* .vs; * vsp; * vsc'''), and then in the Folder in drop-down list to find and select one of the sample projects . The most common folder for the sample projects is '''D: \ Focus \ Sets'''.
	In the ~~ether app defaults~~ to a full screen display output to a connected TV monitor output. All ~~the~~ windows of the main application window, ~~but~~ windows ~~keypads~~, ~~hidden~~ or minimized. ~~When in this mode occurs above described initialization project (pressing Start All~~ ~~). About the program settings related to the operation mode, described in detail in the section "Setting the application mode~~ of ~~ether"~~
	~~Pressing~~ hotbar "~~moving~~ camera" ~~triggers a~~ movement of virtual cameras scene.		After first opening the project name appears in the context menu of the '''Project''' command, and the project can be opened from this menu.

			For operation with documentation select the '''''News.vs''''' project: D: \ Focus \ Documents \ HA3 Project \ News.vs

			When the project is loaded, the application opens to several panels, which are located by default.

			Example of working with the studio - loaded project News.vs

			Directly over a window of the project there is ''hotset'', on which button panels of control of a scene – ''hotbars'' are placed.. They can be seen in the document window News.vs project.

			To test the functionality of the studio, you can click '''Start All''' located on the toolbar(Pic.6). It is intended to start a project. If the previous steps are done correctly, then some time in the ''Preview Render'' a still image of the actor in the scene will change the video with the video source connected to the input video signal and the board selected as the input device for video LIVE_1 settings dialog input video signals(Pic.3). Application thus passes into the testing mode.

			When you press the '''Live Mode''' button, located on the toolbar of the main window, there is a transition in this mode.

			Project ''News'' is in broadcast mode

			In the broadcast mode, the default application is translated to full-screen display output on a connected TV-monitor of an output.
			All windows of the main application window, except windows of button panels, disappear or minimized.

			Clicking of buttons of a hotbar "Moving camera" (Pic. 8) starts movement of the virtual cameras of a scene..

	Hotbar "moving camera" with control buttons		Hotbar "moving camera" with control buttons
	~~Buttons another hotbar this project - "fixed cameras" - designed for switching virtual cameras.~~

	~~Hotbar~~ "~~stationary~~ camera" with control buttons		Buttons of «Static camera» hotbar (Pic. 9) are used to switch virtual cameras.
	When ~~you press~~ the Edit Mode there is a transition ~~from the regime~~ of application ~~of ether~~ in ~~edit~~ mode. In this mode, a simple click ~~on the button of~~ any floating ~~panels~~ leads to ~~her~~ choice, and not the execution of ~~actions~~ by pressing. ~~And to~~ test ~~the effect~~ of the control ~~buttons~~ scene, ~~will not enter the ether~~ after its ~~pressing need to move in~~ the Action tab of the Properties window and ~~click~~ Play. Or switch to another mode of ~~operation of the~~ application - test mode~~. After the test load and start playback of the first example is to investigate the system in more detail by reading the description in the following sections~~.
			"Static camera" hotbar with control buttons

			When clicking the '''Edit Mode''' button there is a transition of application from broadcast mode in an editing mode. In this mode, a simple click any floating toolbar leads to its choice and not the execution of the action by pressing. To test operation of the control button a scene, without passing into broadcast mode, it is necessary to pass after its clicking into the '''Action''' tab of the ''Properties'' window and to press the '''Play''' button. Or switch to another mode of application - test mode.

	=Application HotActions 3.0=		=Application HotActions 3.0=

Natalia: /* Audio Settings */

2016-03-14T06:17:53Z

Audio Settings

← Older revision		Revision as of 06:17, 14 March 2016
Line 66:		Line 66:
	==Audio Settings==		==Audio Settings==

	~~Connect~~ external audio equipment depends on the ~~equipment used by~~ the ~~studio~~ and external equipment. All audio, playable ~~vHotActions~~ 3.0, for example, ~~various~~ wav- or mp3- files ~~run by the script command~~ is output ~~through~~ the sound card selected in the operating system by default. In order to combine the audio stream with audio from a microphone or other sources connected to the switching device must be in the system settings (Start -> Settings -> Control Panel -> Sounds and Audio Devices -> Audio drop-down list Default device: band audio)		Connecting external audio equipment depends on the configuration of the Studio and used external equipment. All the audio, which playable in HotActions 3.0 (for example, wav or mp3 files) is output via the sound card selected in the operating system by default.
	~~Desired~~ mode of mixing ~~sound~~ in the studio ~~(annex HotActions 3.0)~~ can be set using the standard ~~action games~~ and controllers ~~(see. Document Sound Settings)~~.
			The required mode of sound mixing in the studio can be set using the standard actions and controllers.

	==Work with project==		==Work with project==

Bbm: /* Audio Settings */

2015-09-18T12:24:25Z

Audio Settings

← Older revision		Revision as of 12:24, 18 September 2015
Line 64:		Line 64:
	Window settings resulting output image studio		Window settings resulting output image studio

	==~~Sound~~ Settings==		==Audio Settings==

	Connect external audio equipment depends on the equipment used by the studio and external equipment. All audio, playable vHotActions 3.0, for example, various wav- or mp3- files run by the script command is output through the sound card selected in the operating system by default. In order to combine the audio stream with audio from a microphone or other sources connected to the switching device must be in the system settings (Start -> Settings -> Control Panel -> Sounds and Audio Devices -> Audio drop-down list Default device: band audio)		Connect external audio equipment depends on the equipment used by the studio and external equipment. All audio, playable vHotActions 3.0, for example, various wav- or mp3- files run by the script command is output through the sound card selected in the operating system by default. In order to combine the audio stream with audio from a microphone or other sources connected to the switching device must be in the system settings (Start -> Settings -> Control Panel -> Sounds and Audio Devices -> Audio drop-down list Default device: band audio)

Bbm at 12:22, 18 September 2015

2015-09-18T12:22:57Z

← Older revision		Revision as of 12:22, 18 September 2015
Line 94:		Line 94:
	When you press the Edit Mode there is a transition from the regime of application of ether in edit mode. In this mode, a simple click on the button of any floating panels leads to her choice, and not the execution of actions by pressing. And to test the effect of the control buttons scene, will not enter the ether after its pressing need to move in the Action tab of the Properties window and click Play. Or switch to another mode of operation of the application - test mode. After the test load and start playback of the first example is to investigate the system in more detail by reading the description in the following sections.		When you press the Edit Mode there is a transition from the regime of application of ether in edit mode. In this mode, a simple click on the button of any floating panels leads to her choice, and not the execution of actions by pressing. And to test the effect of the control buttons scene, will not enter the ether after its pressing need to move in the Action tab of the Properties window and click Play. Or switch to another mode of operation of the application - test mode. After the test load and start playback of the first example is to investigate the system in more detail by reading the description in the following sections.

	=~~Appendix~~ HotActions 3.0=		=Application HotActions 3.0=

	~~Appendix~~ HotActions 3.0 virtual studio designed to create three-dimensional graphical management environment scenery (3D-scene) in the synthesis of video streams in real time and manage the ensuing interactive mode ether. Presented this window new HotAction 3.0, which means you can operate the virtual studio, and created the video output window TV output, opens when you click the Enable TV output from the Actions menu or the transition to the regime of ether. As mentioned in the introduction, the work with the application HotActions 3.0 includes three main stages:		Application HotActions 3.0 virtual studio designed to create three-dimensional graphical management environment scenery (3D-scene) in the synthesis of video streams in real time and manage the ensuing interactive mode ether. Presented this window new HotAction 3.0, which means you can operate the virtual studio, and created the video output window TV output, opens when you click the Enable TV output from the Actions menu or the transition to the regime of ether. As mentioned in the introduction, the work with the application HotActions 3.0 includes three main stages:

	*Creating modification commands or three-dimensional animation objects of the scene (change their position, replacing texture switching of virtual cameras, etc.), establishing the corresponding elements of the interface for control studio operatively ether.		*Creating modification commands or three-dimensional animation objects of the scene (change their position, replacing texture switching of virtual cameras, etc.), establishing the corresponding elements of the interface for control studio operatively ether.

Natalia: /* Video Settings */

2015-09-07T11:59:37Z

Video Settings

← Older revision		Revision as of 11:59, 7 September 2015
Line 45:		Line 45:
	==Video Settings==		==Video Settings==

	After setting the parameters of the boards for work with video-signals you can to begin development work with the main application virtual Studio – HotActions 3.0. Running the application is made from the '''Start''' menu or by double-clicking the Start icon HotActions 3.0 on the desktop ''Windows''.		After setting the parameters of the boards for work with video-signals you can to begin development work with the main application virtual Studio – ''HotActions 3.0''. Running the application is made from the '''Start''' menu or by double-clicking the Start icon HotActions 3.0 on the desktop ''Windows''.
	Before running this application, you need to connect HASP-key to the USB-port of your computer (operating system must be installed to access it HASPUserSetup.exe). Otherwise, when you run the application the message about the need for such a switch in the system.		Before running this application, you need to connect HASP-key to the USB-port of your computer (operating system must be installed to access it HASPUserSetup.exe). Otherwise, when you run the application the message about the need for such a switch in the system.

Line 56:		Line 56:
	From the '''Stream''' drop-down list under '''Input Source''', select a video stream (LIVE_1, LIVE_2, and so on) to show the video signal connected to the video source input board. Assign an input device – one of the board channels from the '''Device''' drop-down list to the selected video stream.		From the '''Stream''' drop-down list under '''Input Source''', select a video stream (LIVE_1, LIVE_2, and so on) to show the video signal connected to the video source input board. Assign an input device – one of the board channels from the '''Device''' drop-down list to the selected video stream.

	After selecting a channel for video input, you can change the ~~display~~ order of fields in ~~the~~ frame for the video (if there is a need in this), assigning it to the Fields list. Or change the video ~~by specifying~~ the list ~~Input~~ Properties dialog, ~~accessed~~ by pressing ~~the~~ Options button, ~~the~~ index of connection to the switching device to another video card.		After selecting a channel for video input, you can change the order of display fields in a frame for the video (if there is a need in this) by assigning it to the '''Fields''' list. Or change the video specified in the '''Input''' list of '''Properties''' dialog, caused by pressing Options button, index connection to the switching device to another video card.

	In the settings section Cutting edge thickness values are set truncation frame when showing - parts that are not displayed in the frame: top, bottom, left and right, respectively. Blur value determines the smoothness of the transition from un displayable areas of the frame to be displayed. In the corners are detected by truncation at the corners. Pressing Auto happens bootstrapping values thicknesses truncation. Enabling activates the configuration partition off - cancels any truncation in the frame.		In the settings section Cutting edge thickness values are set truncation frame when showing - parts that are not displayed in the frame: top, bottom, left and right, respectively. Blur value determines the smoothness of the transition from un displayable areas of the frame to be displayed. In the corners are detected by truncation at the corners. Pressing Auto happens bootstrapping values thicknesses truncation. Enabling activates the configuration partition off - cancels any truncation in the frame.

	To configure the settings of the input video signal keying (chrome key, or chrome key) need to enable With good as background and sufficient illumination automatic method for setting the table produced by pressing the Auto usually gives good results, detailed settings dialog are described in the document about setting the video. Video output settings of the resulting image in HotActions 3.0 installed in dialogue Render Options, invoked by pressing the F11 key on the keyboard.		To configure the settings of the input video signal keying (chrome key, or chrome key) need to enable With good as background and sufficient illumination automatic method for setting the table produced by pressing the Auto usually gives good results, detailed settings dialog are described in the document about setting the video. Video output settings of the resulting image in HotActions 3.0 installed in dialogue Render Options, invoked by pressing the F11 key on the keyboard.

Natalia: /* Video Settings */

2015-07-10T05:09:47Z

Video Settings

← Older revision		Revision as of 05:09, 10 July 2015
Line 54:		Line 54:
	Setup Dialog input video signals in Annex HotActions 3.0		Setup Dialog input video signals in Annex HotActions 3.0

	~~The~~ list ~~Flow Sources section selects~~ a video stream (LIVE_1, LIVE_2, and so on) to ~~display~~ the video ~~input~~ connected to the ~~motherboard~~ video source. ~~Selected video streams~~ from the list ~~DEVICE is assigned an input device~~.		From the '''Stream''' drop-down list under '''Input Source''', select a video stream (LIVE_1, LIVE_2, and so on) to show the video signal connected to the video source input board. Assign an input device – one of the board channels from the '''Device''' drop-down list to the selected video stream.

	After selecting a channel for video input, you can change the display order of fields in the frame for the video (if there is a need in this), assigning it to the Fields list. Or change the video by specifying the list Input Properties dialog, accessed by pressing the Options button, the index of connection to the switching device to another video card.		After selecting a channel for video input, you can change the display order of fields in the frame for the video (if there is a need in this), assigning it to the Fields list. Or change the video by specifying the list Input Properties dialog, accessed by pressing the Options button, the index of connection to the switching device to another video card.

Natalia: /* Video Settings */

2015-07-09T11:57:46Z

Video Settings

← Older revision		Revision as of 11:57, 9 July 2015
Line 45:		Line 45:
	==Video Settings==		==Video Settings==

	~~A detailed description of the video~~ setting ~~is given in a separate document "Video Setup". Below only tell her about~~ the ~~main stages.~~		After setting the parameters of the boards for work with video-signals you can to begin development work with the main application virtual Studio – HotActions 3.0. Running the application is made from the '''Start''' menu or by double-clicking the Start icon HotActions 3.0 on the desktop ''Windows''.
	~~After the pre-settings~~ of the ~~board~~ for video signals can begin to work with ~~the development of~~ the main application virtual ~~studio -~~ HotActions 3.0. Running it is made from the Start menu or by double-clicking the Start icon HotActions 3.0 on the desktop Windows. Before running this application, you need to connect HASP-key to the USB-port of your computer (operating system must be installed to access it HASPUserSetup.exe). Otherwise, when you run the application the message about the need for such a switch in the system.		Before running this application, you need to connect HASP-key to the USB-port of your computer (operating system must be installed to access it HASPUserSetup.exe). Otherwise, when you run the application the message about the need for such a switch in the system.

	Launch an application studio		Launch an application studio
	Setting video ~~input~~ is made in ~~Annex~~ HotActions 3.0 Video ~~Settings dialog, invoked~~ by ~~clicking~~ the ~~Settings Dialog Videos Keypad Actions~~ or Video ~~Settings command ... from~~ the ~~Actions~~ menu or by pressing the F9 key on ~~your~~ keyboard.
			Setting input video signals is made in the ''HotActions 3.0'' in dialogue '''Input Video Options''' caused by pressing '''Live Video Configure''' button of the push-button panel of '''Tools''' or team '''Video Configure''' of the '''Tools''' menu or pressing of the F9 key on the keyboard.

	Setup Dialog input video signals in Annex HotActions 3.0		Setup Dialog input video signals in Annex HotActions 3.0

	The list Flow Sources section selects a video stream (LIVE_1, LIVE_2, and so on) to display the video input connected to the motherboard video source. Selected video streams from the list DEVICE is assigned an input device.		The list Flow Sources section selects a video stream (LIVE_1, LIVE_2, and so on) to display the video input connected to the motherboard video source. Selected video streams from the list DEVICE is assigned an input device.

	After selecting a channel for video input, you can change the display order of fields in the frame for the video (if there is a need in this), assigning it to the Fields list. Or change the video by specifying the list Input Properties dialog, accessed by pressing the Options button, the index of connection to the switching device to another video card.		After selecting a channel for video input, you can change the display order of fields in the frame for the video (if there is a need in this), assigning it to the Fields list. Or change the video by specifying the list Input Properties dialog, accessed by pressing the Options button, the index of connection to the switching device to another video card.
	In the settings section Cutting edge thickness values are set truncation frame when showing - parts that are not displayed in the frame: top, bottom, left and right, respectively. Blur value determines the smoothness of the transition from un displayable areas of the frame to be displayed. In the corners are detected by truncation at the corners. Pressing Auto happens bootstrapping values thicknesses truncation. Enabling activates the configuration partition off - cancels any truncation in the frame.		In the settings section Cutting edge thickness values are set truncation frame when showing - parts that are not displayed in the frame: top, bottom, left and right, respectively. Blur value determines the smoothness of the transition from un displayable areas of the frame to be displayed. In the corners are detected by truncation at the corners. Pressing Auto happens bootstrapping values thicknesses truncation. Enabling activates the configuration partition off - cancels any truncation in the frame.

Natalia: /* Check the settings of the graphics card (VGA) and run the application HotActions 3.0 */

2015-07-09T09:14:20Z

Check the settings of the graphics card (VGA) and run the application HotActions 3.0

← Older revision		Revision as of 09:14, 9 July 2015
Line 33:		Line 33:
	==Check the settings of the graphics card (VGA) and run the application HotActions 3.0==		==Check the settings of the graphics card (VGA) and run the application HotActions 3.0==

	To work with 3D-graphics in virtual studio must be configured modes of anisotropic filtering and anti-aliasing graphics card. ~~When configuring~~ the studio provides ~~that~~ correct operation ~~is ensured only video graphic adapter GeForce from NVIDIA~~. ~~Check~~ the settings in the ~~dialog cards can~~ Control Panel ~~NVIDIA, call it from~~ the ~~start~~ menu Start -> Control Panel -> NVIDIA Control Panel		To work with 3D-graphics in virtual studio must be configured modes of anisotropic filtering and anti-aliasing graphics card.

			Only the '''''NVIDIA GeForce''''' graphics video adapter included in the studio configuration provides the studio correct operation. To check the video card settings, open the ''NVIDIA Control Panel'' dialog box using the '''Start''' menu: '''Start > Settings > Control Panel > NVIDIA Control Panel'''.

	Setting the video card to work with 3D-graphics		Setting the video card to work with 3D-graphics
	On a page Manage 3D ~~Settings~~ 3D Settings ~~section of dialogue~~ in the drop down list of ~~parameters of anisotropic~~ filtering should be ~~selected~~ maximum mode ~~in smoothing parameters must~~ be set to 16x. But to be able to ~~select~~ and ~~install a regime~~ in the drop-down list ~~Smoothing~~ - ~~mode, you must first~~ select the ~~substitution~~ application settings.
	After ~~checking~~ the settings, ~~you are ready~~ to ~~NVIDIA~~ video ~~settings~~ in the ~~studio~~.		On the page of the '''Manage 3D settings''' under '''3D Settings''' dialog in the drop-down list of settings '''Anisotropic filtering''' should be set to the maximum mode, the '''Smoothing parameter''' should be set to '''16x'''. But to be able to choose and set the mode in the drop-down list '''Antialiasing – mode''' pre-select the '''Override application settings'''.

			After the '''''NVIDIA''''' settings are verified, proceed to setting video signals in the Virtal Studio.

	==Video Settings==		==Video Settings==

Natalia: /* Connection of studio components and external equipment */

2015-07-08T06:07:10Z

Connection of studio components and external equipment

← Older revision		Revision as of 06:07, 8 July 2015
Line 23:		Line 23:
	==Connection of studio components and external equipment==		==Connection of studio components and external equipment==

	First of all, you need to check the switching component of the Studio. All boards input/output video and audio signals, connectors which are displayed on the rear panel of the computer unit of the Studio, you have to connect the respective switching devices for connecting these signals. This can be a special patch cables or panel Breakout Box.		First of all, you need to check the switching component of the Studio. All boards input/output video and audio signals, connectors which are displayed on the rear panel of the computer unit of the Studio, you have to connect the respective switching devices for connecting these signals. This can be a special patch cables or panel ''Breakout Box''.
	Depending on the configuration of a virtual studio computer unit can be installed one or more I / O boards FD322, FD422, FD842 (in the same system can be additionally equipped with boards from other manufacturers (AJA Video systems, Blackmagicdesign, Data path Limited ~~et al~~.), ~~But~~ for final output video and audio signals usually is only one of them.
	~~When running~~ in a virtual ~~studio~~ with analog video (component YUV or RGB, S-Video or composite) video and audio signals ~~to the switching~~ cable or panel is connected to ~~the~~ output board ~~to output~~ the final image studio~~, served~~ on a television monitor. ~~By switching cables or panels also connect any~~ input video - cameras, ~~video recorders~~. For the studio, configured to work with digital signals (SDI), on the back panel of the computer unit must also be connectors for such signals. Computer monitor, keyboard and mouse are connected in a standard way. After validation of compounds can include the computer's power.		Depending on the configuration of a virtual studio computer unit can be installed one or more input/output boards ''FD322, FD422, FD842'' (''in the same system can be additionally equipped with boards from other manufacturers (AJA Video systems, Blackmagicdesign, Data path Limited, etc.''), but for final output video and audio signals usually is only one of them.

			During the work in virtual studios with analog video signals (component YUV or RGB, S-Video or composite) video and audio-signals of a patch cable or the panel connected to an output board for a conclusion of the final image of studio gives on the television monitor. Sources of input video (video cameras, videorecorders) are also connected to patch cables or panels.

			For the studio, configured to work with digital signals (SDI), on the back panel of the computer unit must also be connectors for such signals. Computer monitor, keyboard and mouse are connected in a standard way. After validation of compounds can include the computer's power.

	==Check the settings of the graphics card (VGA) and run the application HotActions 3.0==		==Check the settings of the graphics card (VGA) and run the application HotActions 3.0==

Natalia: /* Switching components studio and connection of external equipment */

2015-07-08T04:35:33Z

Switching components studio and connection of external equipment

← Older revision		Revision as of 04:35, 8 July 2015
Line 21:		Line 21:
	This chapter describes how to test the functionality of the virtual studio, and the fundamentals of working with the application ''HotActions 3.0''. Subsequent chapters of this document describe in detail the application. Description of setting video and audio separate cover.		This chapter describes how to test the functionality of the virtual studio, and the fundamentals of working with the application ''HotActions 3.0''. Subsequent chapters of this document describe in detail the application. Description of setting video and audio separate cover.

	==~~Switching~~ components ~~studio~~ and ~~connection of~~ external equipment==		==Connection of studio components and external equipment==

	First of all, check the switching component ~~studio~~. All I / ~~O cards~~ video and audio signals, which ~~connectors~~ on the rear panel of the computer unit ~~studio~~, you ~~need~~ to connect the ~~corresponding~~ switching ~~device to connect~~ these signals. This can be a special ~~connection~~ cables or ~~panels~~ Breakout Box.		First of all, you need to check the switching component of the Studio. All boards input/output video and audio signals, connectors which are displayed on the rear panel of the computer unit of the Studio, you have to connect the respective switching devices for connecting these signals. This can be a special patch cables or panel Breakout Box.
	Depending on the configuration of a virtual studio computer unit can be installed one or more I / O boards FD322, FD422, FD842 (in the same system can be additionally equipped with boards from other manufacturers (AJA Video systems, Blackmagicdesign, Data path Limited et al.), But for final output video and audio signals usually is only one of them.		Depending on the configuration of a virtual studio computer unit can be installed one or more I / O boards FD322, FD422, FD842 (in the same system can be additionally equipped with boards from other manufacturers (AJA Video systems, Blackmagicdesign, Data path Limited et al.), But for final output video and audio signals usually is only one of them.
	When running in a virtual studio with analog video (component YUV or RGB, S-Video or composite) video and audio signals to the switching cable or panel is connected to the output board to output the final image studio, served on a television monitor. By switching cables or panels also connect any input video - cameras, video recorders. For the studio, configured to work with digital signals (SDI), on the back panel of the computer unit must also be connectors for such signals. Computer monitor, keyboard and mouse are connected in a standard way. After validation of compounds can include the computer's power.		When running in a virtual studio with analog video (component YUV or RGB, S-Video or composite) video and audio signals to the switching cable or panel is connected to the output board to output the final image studio, served on a television monitor. By switching cables or panels also connect any input video - cameras, video recorders. For the studio, configured to work with digital signals (SDI), on the back panel of the computer unit must also be connectors for such signals. Computer monitor, keyboard and mouse are connected in a standard way. After validation of compounds can include the computer's power.